Outdoor Planting Tips

Outdoor Planting Tips

Level: Beginner

One of the easiest and most affordable ways to enhance the appearance of your yard is by adding plants, shrubs and trees. So, if you're looking to add some color or a little shade, here are some great, simple landscaping and gardening ideas, as well as planting tips to help you get started.

Share this project
Project Steps
Project Shopping List
  • Planting Tips for Container-Grown Plants

    container grown plant

    Planting container-grown plants is a popular and convenient way to landscape. These plants are sold throughout the growing season and are easy to transport and plant.

    Helpful Tip

    Look for healthy, insect-free foliage and strong shoots when selecting your plants.

    • Step 1: Dig a Hole

      With a spade, dig a hole that is a little wider than the container but not quite as deep. Check by setting the container into the hole — the top of the soil in the container should be slightly higher than the surrounding soil. Dig several holes at a time, at the positions that you've already marked out.

      Helpful Tip

      Before you start digging, make sure the gardening site you are planting has the correct amount of sunlight that the plant requires.

    • Step 2: Remove the Container

      With one hand, grip the plant at the base of its stems while you tug on the pot with the other hand. If the pot doesn't slide off easily, don't pull harder on the stems. Try hitting the pot against a hard surface; if it still doesn't slide off, use a knife or scissors to cut or pry it off. Once you've taken a plant out of its container, get it in the ground as soon as possible.

    • Step 3: Unwind the Roots

      Examine the plant's roots. If there are any thick, coiled roots, unwind them and cut them off with a utility knife close to the root ball, leaving short stubs. If the root ball is a mass of fine, hairlike roots, cut three or four slits from top to bottom, about 1" deep. Pry the slits apart and tease the cut roots to loosen them. This cutting or slitting may seem drastic, but it's actually good for the plant because it forces new roots to grow out into the surrounding soil. If you want to prepare several plants at a time, cover them with an old sheet or tarp to keep the roots from drying out.

    • Step 4: Position Plant

      Set the root ball into the hole making sure it is level with or slightly higher than the surface of the bed. Then add enough top soil to fill in the hole, and pat it down firmly.

    Planting Tips for Shrubs and Trees

    Local nurseries often grow shrubs and trees in fields, then dig them with a ball of root-filled soil and wrap a layer of burlap snuggly around the root ball to keep it intact. The main drawback with this process is that even a small ball of soil is very heavy. If the ball is more than a foot wide, moving the plant is usually a two-person job. If you're buying a tree with a ball bigger than that, ask the nursery to deliver and plant it. Here's how to proceed with plants that are small enough for you to handle:

    • Step 1: Dig a Hole
      digging a hole

      With a shovel, dig a hole that is several inches wider than the root ball but not quite as deep as the root ball is high.

      Helpful Tip

      Before you start digging, make sure gardening site you are planting has the correct amount of sunlight that the shrub or tree requires.

    • Step 2: Firm the Soil

      Step in the bottom of the hole to firm the soil so the plant won't sink.

    • Step 3: Position Shrub or Tree

      Place the root ball into the hole. Lay a stick across the top of it to make sure it's at or a little higher than ground level. Be sure to cut or untie any twine that wraps around the trunk with a utility knife. Fold the burlap down around the sides of the root ball. Don't try to pull the burlap out altogether since roots can grow out through it and the bag will eventually decompose.

    • Step 4: Surround with Soil

      Fill top soil around the sides of the root ball and pat it down firmly. At ground level, form a mound of soil at the bottom of the tree or shrub, forming a berm that will catch water like a basin. This will help keep the roots well watered, until it becomes established. Add 2 to 3 inches of mulch to combat weeds.

    • Step 5: Water, Water, Water
      finished landscape

      Until new roots grow out of the root ball and into the soil, make sure you water the root ball as you water the area around it. To ensure the newly transported shrub or tree survives, check the moisture in this area frequently for the first month or two after planting. Provide at least one inch of water per week during the growing season.

      Congratulations! We hope these planting tips will make your green thumb even greener!

  • Here’s what you’ll need to complete this project successfully.

    Before you begin, use the shopping list below to uncheck the tools you already have to complete this project.

    Then, print or save your updated list and bring it to your local True Value hardware store, where an expert Hardwarian will give you the remaining tools and expert advice you need to complete this project.

    You can also shop online for these project items at TrueValue.com and receive FREE shipping to a participating store.

    Plant Container-Grown Plants

    Plant a Shrub or Tree

    60 character limit.

    Fire Prevention Tips

    Protect what matters most with these home safety precautions and fire prevention tips.

    Learn How

  • Seal Your Driveway

    Seal Your Driveway

    Invest in your home's curb appeal by prolonging the life of your driveway.

    Learn More

  • Humidify Your Home

    Humidify Your Home

    Counteract the dryness in the air.

    Learn More

  • How to Boost Your Home's Curb Appeal

    Boost Your Home's Curb Appeal

    Make a great first impression -- it's usually the only one you get.

    Learn More

  • Pinterest

    Follow Us On Pinterest

    ​Visit our Pinterest page for great do-it-yourself project advice and home inspiration.

    Learn more