Garden Bed Edging Ideas

Garden Bed Edging Ideas

Level: Experienced

Edging your garden provides a functional and fashionable border that sets your planting space apart from the rest of your lawn. It also protects the garden against erosion, which is more than a mulched bed alone can do.

When it comes to home gardens, the most common types of edging are plastic strip or precast pavers made of brick or stone. You can also simply dig a trench around your garden. No matter what type of edging you choose, this project will show you how to get the job done right.

Share this project
Project Steps
Project Shopping List
  • Dig a Trench

    Gardening shovel and gloves

    The most basic and economical way to edge your garden is digging an "edge." Simply dig a trench around your garden or flowerbed with a spade, cutting downward about 4". Standing inside the bed, dig at an angle towards your cut. You can make the trench as wide as you like as long as the trench is the same width all the way around the garden.

    You can leave the trench empty, but filling it with pebbles or crushed rocks gives your garden definition and aesthetic appeal. Filling the trench will also save you work in the long run—trenches without fill have to be re-cut from time to time.


    Plastic Edging

    Garden bed edging

    Plastic edging usually comes in a roll of black, formed plastic and is easy to install. Because it's flexible and can be bent to fit, plastic edging is a great choice if your bed has irregular or uneven borders.

    • Step 1: Dig an "Edge"

      Make a 4" deep cut around the perimeter of your garden using a flat-bladed spade or trowel.

      Helpful Tip

      Laying a garden hose around your garden bed before you start is a good way to mark the shape your edging will take. Once you're happy with how the garden hose is arranged, mark the border using chalk or grass-friendly spray paint.

    • Step 2: Place the Edging

      Put in the plastic edging into the slice you just made with the rounded top sticking up. The top should only stick out of the trench about 1". After all, plastic edging isn't meant to be the focal point of your garden. It simply provides a discreet border around your bed, protecting it from invasive grass and weeds.

    • Step 3: Anchor It

      Anchor the edging into the ground with metal garden-edging stakes placed every few feet. Once the edging is secure, push the soil you dug out against the back of it.

      Once your garden has been edged, you can use your lawn care equipment safely around your new plastic edging.

    Brick, Stone and Concrete Edging

    For a more formal garden, you might want to use brick, stone or concrete pavers as edging. No matter which kind of stone you choose, the installation process is very similar.

    • Step 1: Map it Out

      Based on the size of your edging blocks and how you are laying them out, you'll have to mark a path around your garden. Set a string line that runs the full length around your bed. This will keep the path of edging uniform around the garden. Then, mark it with grass-friendly spray paint or chalk. Take note of the dimensions of your edging blocks so you'll know how wide to make the trench.

    • Step 2: Make the Cut

      Using a spade or trowel, cut 4" into the soil. Once the cut is made, dig towards your cut from the garden bed until the brick or stone edging can sit level below the roots of the grass.

    • Step 3: Prepare the Ground

      To prepare the ground before laying the edging, make sure there's a solid footing for the bricks or stone to rest on. Filling the cut with a sand or gravel foundation will create a solid base. If your yard sees a lot of flooding, opt for a gravel foundation since it's the more stable option. Fill the cut with sand or gravel high enough so when the edging block is laid, it will sit about 1" above the ground.

    • Step 4: Lay Them Down
      a garden bed with finished edging

      Put the first block at the desired height and correct level. Using this first edging block as your guide, lay the rest of the blocks keeping them straight and uniform. The tops of the blocks should sit just a bit above the ground. Depending on the shape and size of your garden, you might need to cut some of the bricks or stones to make them fit. You can rent a brick saw to make any needed cuts. An angle grinder with a stone cutting blade can also do the job.

      Safety Alert!

      When edging with brick or stone blocks, be aware of the height of your edging. They might not be safe to go over with a mower.

      Nice work! Not only will your new edging make your garden look like it was installed by a professional, the edging will last for many years.

  • Here’s what you’ll need to complete this project successfully.

    Before you begin, use the shopping list below to uncheck the tools you already have to complete this project.

    Then, print or save your updated list and bring it to your local True Value hardware store, where an expert Hardwarian will give you the remaining tools and expert advice you need to complete this project.

    You can also shop online for these project items at and receive FREE shipping to a participating store.

    60 character limit.

    Fire Prevention Tips

    Protect what matters most with these home safety precautions and fire prevention tips.

    Learn How

  • Seal Your Driveway

    Seal Your Driveway

    Invest in your home's curb appeal by prolonging the life of your driveway.

    Learn More

  • Humidify Your Home

    Humidify Your Home

    Counteract the dryness in the air.

    Learn More

  • How to Boost Your Home's Curb Appeal

    Boost Your Home's Curb Appeal

    Make a great first impression -- it's usually the only one you get.

    Learn More

  • Pinterest

    Follow Us On Pinterest

    ​Visit our Pinterest page for great do-it-yourself project advice and home inspiration.

    Learn more